Endstops:



Endstops are easy to be done, if you own a CNC milling machine - 15th September 2018

  • [x] Started
  • [x] On-Going
  • [x] Fully-Functional
  • [x] Open-Source


Endstops Eagle Files and PNGs <<-- Click here

endstop02
endstop01
endstop01
endstop01


These capacitive sensors read magnetic materials great! Mild-Steel is great, Aluminium works well also. They come with 3 wires, Gnd, VCC and Signal. For signal it needs 5V, for Gnd and VCC 12V.


Below is the quick and dirty prototyping we did for the B-va CNC. It worked so I cleaned it up.

endstop01



Note the 10K ohms used for the PullUp resistor!



Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.



home